Lightness. Release harmful gases. Low thermal expansion. Chemical resistance. Drawbacks high printing temperatures. Nozzle wear. Things to consider when printing melting temperature between 230 and 265 ºc. No need for a warm bed it is necessary to use reinforced stainless steel nozzles from 0.4mm onwards. Tpu (thermoplastic elastomer) and tpe (thermoplastic polyurethane) - flexible filaments we end this post with flexible 3d printing filaments.
Both tpu and tpe are flexible and the difference between them is in the degree of hardness. The choice between one or the other will depend on this e commerce photo editing characteristic, with tpu being firmer than tpe. It can be used for toys, mobile covers, decorative pieces, etc. Advantage soft and shock-absorbing materials. Recyclable. It can be moderately stretched and returns to its shape. Drawbacks low resistance to heat and chemicals. Absorbs moisture from the environment. They must be stored very well in vacuum bags with their corresponding silica bag. Its flexibility decreases over time and also if it is printed at temperatures higher than those recommended by the manufacturer.
Things to consider when printing printing at speeds less than 30mm/s is recommended. Printing temperature for tpe approximately 220 ºc and hot bed around 30 ºc. Printing temperature for tpu approximately 250 ºc and hot bed around 50 ºc. It is necessary to use nozzles of 0.4 mm and above.the architecture and engineering software company cype has developed a global collaboration platform called the bim server center . Know what it is? What is it for? Or how is it used? What is? Bim server center is an open technology social network or open bim. It is an open cloud so that all construction participants can share and interact with information through bim technology. The format used is